Glow in the Dark classes are now available. Book your spot before it's gone! ✨

Public Kiln Firing


Got Clay? We'll Fire It. 🔥

Whether you’re a home potter, DIY daredevil, or a proud Crockd Kit creator, our Public Firing Service is here to bring your creations to life. You bring the goods, we bring the heat.

 

Firing Services & Pricing

Straightforward, just how we like it:

  • Bisque Firing (Cone 06) — $10 per kg
  • Glaze Firing (Cone 7) — $10 per kg
  • Clear Glaze Application + Firing — $20 per kg

    All payments are made at drop-off via our in-studio self-serve kiosk.

 

💡 $20 minimum spend applies

 

Where to Fire

Public firing is currently available at:

  • Bondi, NSW
  • Currumbin Waters, QLD

 

Want to check open hours?

👉 View Bondi Hours | View Currumbin Hours

 

Got a Crockd Kit? You’re welcome to drop it off at any Crockd studio — even if they don’t offer public firing. We’ll handle it from there.

 

How It Works

Let’s break it down:

  1. You bring in your precious clay babies
  2. We weigh them, take payment, and hand you your firing tickets
  3. Pop a ticket with each piece and place them on the designated shelf
  4. We fire them with care (and a little kiln magic)

🚫 Please note:

  • We can’t accept unmarked work — make sure your pieces have initials or a stamp
  • Work must be bone dry (no damp bottoms, please)
  • No boxes or packaging can be left behind
  • Bring your box back with you when it’s time to collect

Ready to Fire? Here’s What to Do Next

Our studios are now set up with self-serve firing kiosks to make the process easy breezy. When you’re ready:

  1. Check studio hours (click here)
  2. Drop by during open times — no need to book
  3. Our team can walk you through it your first time
  4. Leave your work, take your good vibes, and wait for the firing magic to happen

We’ll send you a text when your pieces are ready to collect. Turnaround is usually within 2 weeks, but timing may vary based on kiln schedules and piece size. We promise not to ghost you 👻

 

Important Firing Terms & Conditions

Pottery is unpredictable — and that’s part of the charm. But here’s what you need to know before firing with us:

🧪 Know Your Materials

You’re responsible for understanding the clay and glazes you’ve used, including:

  • Clay type & cone rating
  • Glaze behavior (e.g., if it runs)
  • Firing temperature needed

🚨 Firing Risks & Liability

  • We are not liable for cracks, breaks, or glaze mishaps
  • If your piece damages someone else’s work, you may be liable for their firing cost
  • If your piece damages our kiln, repair fees will apply
  • Misfires happen — if it's a kiln fault, we’ll refire or waive the fee
  • Lost or uncollected pieces will not be replaced

📏 Firing Rules

To keep the kiln gods happy:

  • All work must be marked with initials or a maker’s stamp
  • No wet work — pieces must be bone dry
  • No glaze on the base — underglaze is fine
  • No foreign materials (metal, wood, plastic, etc.)
  • Use kiln setters for:
    • Runny glazes
    • Iron-rich clays (e.g., BRT, FHB)
  • Solid/thick pieces must be hollow with a visible vent hole
  • You’re responsible for any damage your work causes to:
    • Kiln shelves ($25 cleaning fee or replacement cost)
    • Kiln interior (fees based on damage)

By submitting your work, you agree to these terms. Thanks for playing safe and firing smart ❤️